Oracle MICROS Express Station 4 Series User Manual

4
Express Station and Accessories Setup
and Use
This section contains instructions for setting up and using the Express Station and its
accessories.
Installing the Handle with Bump Bar Mounting Bracket
The Handle with Oracle MICROS Bump Bar Mounting Bracket for Oracle MICROS
Express Station 4 Series is an optional product. Contact your Oracle MICROS
representative for more information.
Installing the Handle with Bump Bar Mounting Bracket and the 20-Key Bump Bar
1. Attach the 20-key bump bar silver mounting plate to the handle. Note: The silver
plate is included in the box with the 20-key bump bar.
2. Place the 20-key bump bar into the plate by inserting the two grooves on the side
of the plate into the slots on the bump bar, and then tighten the security screw.
4-1

Oracle MICROS Express Station 4 Series Specifications

General

Brand	Oracle
Model	MICROS Express Station 4 Series
Category	Touch terminals
Language	English