3
Express Station Setup and Software
Installation – Basic Steps
This section provides basic hardware setup guidance and describes the software
setup process that occurs when you turn on your new Express Station.
Mounting the Express Station on an Oracle MICROS Stand
The Express Station can be mounted on a variety of Oracle MICROS stands. Although
the stands vary in appearance, the mounting procedure is identical.
The following steps describe how to mount the workstation on the Oracle MICROS
Compact Stand.
1. Place the stand upright on a level surface.
2. Place the Express Station face down on a flat surface, and then remove the I/O
panel cover by sliding it away from the Express Station.
3. Place the Express Station on the stand so that the four nubs rest on the mount.
3-1
To Next Page
Loading...
Need help?
General
