Oracle ZFS Storage ZS5-2 User Manual

Verifying Operation of the Oracle ZFS Storage ZS3-2 Slide-Rails
and CMA
Use the following procedure to verify the operation of the optional cable management arm
(CMA) and slide rails on an Oracle ZFS Storage ZS3-2 controller.
Before You Begin
Ensure all rack anti-tilt devices are extended to prevent the rack from tipping forward when
the storage controller is extended from the rack.
1. Slowly pull the storage controller out of the rack until the slide-rails reach their stops.
2. Inspect the attached cables for any binding or kinks.
3. Verify that the CMA extends fully with the slide-rails.
4. Push the storage controller back into the rack and verify that the CMA retracts without
binding.
5. Adjust the cable straps and the CMA, as required.
Chapter 9
Verifying Operation of the Oracle ZFS Storage ZS3-2 Slide-Rails and CMA
9-11

Oracle ZFS Storage ZS5-2 Specifications

General

Brand	Oracle
Model	ZFS Storage ZS5-2
Category	Storage device
Language	English