Oracle ZFS Storage ZS5-2 User Manual

Overview of the Oracle ZFS Storage ZS3-4 Controller
This section provides an overview of the Oracle ZFS Storage ZS3-4 controller. For installation
instructions, refer to Installing an Oracle ZFS Storage ZS4-4 or Oracle ZFS Storage ZS3-4
Controller. For service instructions, refer to Servicing the ZS3-4 Controller in Oracle ZFS
Storage Appliance Customer Service Manual, Release OS8.8.x.
Oracle ZFS Storage ZS3-4 Electrical Specifications
The following list shows the electrical specifications for the Oracle ZFS Storage ZS3-4
controller.
Note:
The power dissipation numbers listed are the maximum rated power numbers for
the power supply. The numbers are not a rating of the actual power consumption of
the appliance.
Input
• Nominal frequencies: 50/60Hz
• AC operating range: 200-240 VAC
• Maximum current AC RMS: 12A @ 200 VAC
Power Dissipation
• Max power consumption: 1800 W
• Max heat output: 6143 BTU/hr
• Volt-Ampere rating: 1837 VA @ 240 VAC, 0.98 P.F.
Oracle ZFS Storage ZS3-4 Configuration Options
The Oracle ZFS Storage ZS3-4 controller can be configured as a single controller or two
controllers to create a high-availability cluster configuration. The following table describes the
configuration options:
CPU Memory Readzilla SAS-2 Boot Drive SAS-2 HBA SAS-2
4x10-core,
2.40GHz
1TB (16GB
DIMMs)
Four SSDs Two HDDs 4-port (4X4) SAS-2
6Gb/s external
Refer to https://oracle.com/zfsstorage for the most recent component specification.
Chapter 2
Overview of the Oracle ZFS Storage ZS3-4 Controller
2-43

Oracle ZFS Storage ZS5-2 Specifications

General

Brand	Oracle
Model	ZFS Storage ZS5-2
Category	Storage device
Language	English