Oriental motor BLE Series - 5 Preparation; Product Checking and Model Identification

Preparation
−
8
−
5 Preparation
This chapter explains the items you should check, as well as the names and functions of each part.
5.1 Checking the product
Verify that the items listed below are included. Report any missing or damaged items to the branch or sales ofce
from which you purchased the product.
Verify the model number of the purchased product against the number shown on the package label.
Check the model number of the motor, gearhead, driver against the number shown on the nameplate.
Model names for motor, gearhead, driver combinations are listed in section “5.3 Combination tables.”
•
Motor ........................................................1 unit
(with a gearhead, only for combination type)
•
Driver ........................................................1 unit
•
Connection cable .....................................1 pc.
(Only models with a supplied connection cable)
•
Operating manual (this manual) ............... 1 copy
•
External potentiometer .............................1 pc.
•
Signal cable for external potentiometer....1 pc.
[1 m (3.3 ft.)]
Accessories for combination type parallel shaft
gearhead
•
Hexagonal socket head screw set ...............1 set
(Hexagonal socket head screw, at washer, spring
washer and nut, 4 pcs. each)
•
Parallel key...................................................1 pc.
Accessories for combination type hollow shaft
at gearhead
•
Hexagonal socket head screw set ...............1 set
(Hexagonal socket head screw, at washer, spring
washer and nut, 4 pcs. each)
•
Safety cover .................................................1 pc.
•
Safety cover mounting screw .......................2 pcs.
•
Parallel key...................................................1 pc.
5.2 How to identify the product model
BLE 5 12 A M 5 S - 1
Number: Length (m) of a supplied connection cable
None: Without a supplied connection cable
M : Electromagnetic brake type
None : Standard type
Gearhead type for combination type S : Parallel shaft gearhead
F : Hollow shaft flat gearhead
Number: Gear ratio for combination type
A: Round shaft type
Power supply voltage A : Single-phase 100-120 V
C : Single-phase 200-240 V
S : Three-phase 200-240 V
Output power 3 : 30 W
6 : 60 W
12 : 120 W
Motor size 2 : 60 mm (2.36 in.) sq.
4 : 80 mm (3.15 in.) sq.
5 : 90 mm (3.54 in.) sq.
Series name