Oriental motor BLVD20KM - 5 Preparation; Checking the Product; Combinations of Motors and Drivers

Preparation
−9−
5 Preparation
This chapter explains the items you should check, as well as the name and function of each part.
5.1 Checking the product
Verify that the items listed below are included. Report any missing or damaged items to the branch or sales oce
from which you purchased the product.
Verify the model number of the purchased product against the number shown on the package label.
Check the model number of the motor and driver against the number shown on the nameplate.
Refer to "5.2 Combinations of motors and drivers" for the motor and driver package names and corresponding motor
and driver combinations.
•
Motor ................................................................................. 1 unit (with a gearhead, only for combination type)
•
Driver ................................................................................. 1 unit
•
Connection cable .......................................................... 1 pc
•
CN1 connector ............................................................... 1 pc
•
Operating Manual ......................................................... 1 copy
Included with combination type-parallel shaft gearhead
•
Mounting screw set ...................................................... 1 set
(hexagonal socket head screw, plain washer, spring washer, nut each 4 pcs.)
•
Parallel key ....................................................................... 1 pc
(For the
BLV620
and
BLV640
products, the parallel key is xed to the gearhead output shaft.)
Included with combination type-hollow shaft at gearhead
•
Mounting screw set ...................................................... 1 set
(hexagonal socket head screw, plain washer, spring washer, nut
*
each 4 pcs.)
•
Parallel key ....................................................................... 1 pc
•
Safety cover ..................................................................... 1 pc
•
Safety cover mounting screw ................................... 2 pcs.
∗*
For the
BLV620
and
BLV640
products, hexagonal nuts are not included.
5.2 Combinations of motors and drivers
•
The box (

) in the model name indicates a number representing the gear ratio.
•
The box (

) in the model name indicates a number representing the length of an connection cable.
•
The combination types come with the motor and gearhead pre-assembled.

Standard type
•
Combination type-parallel shaft gearhead
Output power Model Motor model Gearhead model Driver model
100 W
BLV510K

S-

BLVM510K-GFS GFS5G

BLVD10KM
200 W
BLV620K

S-

BLVM620K-GFS
GFS6G

BLVD20KM
400 W
BLV640N

S-

BLVM640N-GFS BLVD40NM
•
Combination type-hollow shaft at gearhead
Output power Model Motor model Gearhead model Driver model
100 W
BLV510K

F-

BLVM510K-GFS GFS5G

FR BLVD10KM
200 W
BLV620K

F-

BLVM620K-GFS
GFS6G

FR
BLVD20KM
400 W
BLV640N

F-

BLVM640N-GFS BLVD40NM
•
Round shaft type
Output power Model Motor model Driver model
200 W
BLV620KA-

BLVM620K-A BLVD20KM
400 W
BLV640NA-

BLVM640N-A BLVD40NM