Orion OPM-4260 - DVI Converter Advanced Settings; Picture Control, Patterns, and Lock;FreeRun

- 62 - - 63 -
(9) Picture Control
• Control the Brightness, Contrast, Sharpness, Color, and Tint of the DVI Converter.
• Brightness : The range of "Brightness" you can adjust is 0 to 100.
• Contrast : The range of "Contrast" you can adjust is 0 to 100.
• Sharpness : The range of "Sharpness" you can adjust is 0 to 28.
• Color : The range of "Color" you can adjust is 0 to 100.
• Tint : The range of "Tint" you can adjust is 0 to 90.
• Firmware Default : Initialize the adjusted values to the default values.
(10) Pattern
• Select the Test Pattern (Red, Blue, 8-Color, 16-Gray, Green, White, White (10%), Screen)
• Set : Set or change the Pattern.
(11) Lock/FreeRun
• Lock : Default setting. It is used when MPDP is configured as the default display.
If the vertical frequency of input signal and out signal is identical, output is generated
according to vertical synchronization of input signal.
• FreeRun : This function is used when the default display is not MPDP and screen image is not
displayed. It generates its own output vertical frequency regardless of input signal.
If screen image is displayed, use Lock mode.
• Lock/FreeRun can be configured by the keypad of DVI converter besides MSCS.
While Menu OSD is not displayed, FreeRun mode can be selected by pressing UP key and Lock
mode by DOWN key.
OPM-4260 | OPM-4260R
Innitely Expandable