Osprey TALON Series User Manual

Osprey Talon User Guide
10
Prerequisites
Before connecting the Osprey Talon encoder, ensure you comply with the following prerequisites:
 All packaged items are undamaged and in working order.
 Your environment meets all starting requirements.
 Safety instructions, notices, and warnings detailed in “Before you Begin” including:
 FCC Notice
 Environmental Notices
 Warnings
You must complete the following tasks to setup the Osprey Talon encoder:
 Address and comply with the prerequisites above.
 Connect the Osprey Talon encoder using supplied power source.
 Connect the Osprey Talon encoder to an IP network with DHCP enabled.
 Access the ‘Configuration Host’ computer on the same network.
 Start the ‘Osprey BOSS’ application.
 Select the Talon that matches your serial number.
 Configure the Osprey Talon encoder.

Osprey TALON Series Specifications

General

Hydration Compatible	Yes
Adjustable Torso Length	Yes
Material	Nylon
Features	multiple pockets
Intended Use	Hiking
Pack Access	Top
Harness	Adjustable
Number of Pockets	Multiple (stretch mesh side pockets, zippered hipbelt pockets, etc.)