Osprey Talon User Guide
6
Product Description
The Osprey Talon is a small form-factor H.264 video encoder designed to be easy to use, portable, and
easily stream both your standard definition and high definition content to broadband and mobile
networks in H.264 RTMP servers such as Adobe® and Wowza®.
Audience
The audience for this user guide includes anyone who uses or administers the Osprey Talon series. Users
should have a basic technical understanding of streaming media. This user guide provides information
on the Osprey Talon series only.
Warnings
Only trained and qualified personnel should install, replace, or service this equipment.
Do not attempt to open the case of the system. If you do, you incur a high risk of electrical shock that
may cause damage to the system or personal physical injury or death to you and/or others. No user-
serviceable parts exist inside the system. If you open the system case or make unauthorized changes to
the case, you void the warranty.
Install the system away from any heat sources. This remains vital to the safety of the product users. Do
not install the system near any heat sources such as:
Radiators
Heat registers
Stoves
Other heat-producing equipment
WARNING! Installing the system near heat sources could result in personal injury or
death.
Never insert objects of any kind into the system through any system openings, as the
objects may touch dangerous voltage points, short out parts, and result in a risk of
fire or electrical shock.
Do not stack the system atop or below other electronic devices as this can cause heat build-up and
vibration of the system. These conditions can damage the system thereby voiding the limited warranty.
You may stack multiple Osprey Talon units as these systems accommodate stacking.
Do not install the system in any area where the temperature is less than 5°C or more than 40°C. Transfer
from temperature extremes may cause condensation. Let the system remain unplugged at room
temperature for at least 45 minutes before connecting it.