Osprey TALON Series - System Configuration and Control; System Control Tab: IP and Device Management

Osprey Talon User Guide
16
System Control Tab
This tab accesses most of the administrative functions of the Talon.
Talon IP Setup
By default, Talon receives its IP address via DHCP. If you need to use a manual address it can be set in
the IP setup dialog box on the System Control page. If you are not familiar with the settings found here
check with your system administrator before changing any settings.
Feature
(default)
Description
IP Address
Automatically Assigned
Sets the IP address
Netmask
Automatically Assigned
Sets the netmask
Gateway
Automatically Assigned
Sets the gateway
Use DHCP
Checked
Enables/Disables DHCP