Osprey TALON Series User Manual

Osprey Talon User Guide
13
First time set up
You should read all instructions, notices, and warnings in the previous section prior to getting started
with your new Osprey Talon hardware for the first time. Also, ensure you have all required parts and
meet all system requirements before installing this product.
Do not continue with the installation if you find any components missing or damaged. Contact the
Osprey reseller where you purchased your Osprey Talon system for assistance in obtaining any missing
or replacement parts.
Connecting to an electrical power source
The Osprey Talon ships with an AC to DC converter 12V.
To connect the power source:
1.
Attach the connector end of the AC/DC adapter to the Osprey Talon.
2.
Plug the other end of the cable into a wall outlet or surge protection enabled power strip
connected to a wall outlet or other common power source.
WARNING! The plug-socket combination must remain accessible
at all times as it serves as the main disconnecting device.
Do not work on the system or connect or disconnect cables
during periods of lightning activity.

Osprey TALON Series Specifications

General

Hydration Compatible	Yes
Adjustable Torso Length	Yes
Material	Nylon
Features	multiple pockets
Intended Use	Hiking
Pack Access	Top
Harness	Adjustable
Number of Pockets	Multiple (stretch mesh side pockets, zippered hipbelt pockets, etc.)