Osprey Talon User Guide
14
Web Interface
Talon is configured and controlled exclusively from an internal webpage. This page was designed to
provide easy access to all of the configuration features of the Talon. Its simplicity makes it easy to use
even from tablets and smart phones.
Login
To login to the Talon page, first enter the IP address of Talon in a web browser (show below) and press
enter.
By default, the Talon receives its IP address via DHCP. If you are unable to determine the address of your
encoder, we have created an application for finding Talon and performing some critical remote
functions. Please consult the section labeled finding your encoder with Osprey BOSS at the end of this
user guide.
Your browser will be directed to the Talon Web Interface. The default password is ‘osprey’. For
increased security always change the default password.
Upon login, you will reach the home page of the web configuration site.