OTT netDL 1000 User Manual

14
6 Overview: Starting up the OTT netDL unit
Starting up a OTT netDL unit is done in a maximum of 10 steps:
Refer to chapter
1. Device versions "B..." and "C...":
Inserting the SIM card 7.16
2. Attaching the datalogger 7.1
3. Connecting sensors from 7.2
4. Connecting switching contacts* 7.12
5. Connecting 4-20 mA outputs* 7.13
6. Connecting status outputs* 7.14
7. Connecting the power supply 7.15
8. Device versions "B..." and "C...":
Connecting the GSM cellular radio antenna 7.16
9. Installing and connecting external communication equipment* 7.17
10. OTT netDL 1000: Connecting an Ethernet LAN or DSL router* 7.18
11. Configuring the datalogger and setting operating parameters 8
(also refer to the online help of the operating program)
* Only if required

OTT netDL 1000 Specifications

General

Brand	OTT
Model	netDL 1000
Category	Data Loggers
Language	English