9.8 Displaying system information
Upon request, the OTT netDL shows the last 10 events recorded (event log) as well
as the particular device version (Systeminfo).
How to display the event log:
Press jog shuttle twice. (Between the first and second presses, the
L
CD display
shows the OTT netDL firmware version.)
The OTT netDL unit activates the
LCD dis-
play
and shows the selection menu (if password protection for the LCD display
is active ➝ enter the four-digit password first; refer to online help).
Rotate jog shuttle to
Information a
nd press.
Rotate jog shuttle to System and press.
Press jog shuttle (Event LoÌ).
The LCD display shows information on the first event:
Line 1: Function, instance
Line 2: Type, code
Line 3: Date and time of the event
Show information on the event in clear text ➝ Rotate and jog shuttle to select
the line 1 or 2, and press.
Exit clear text display: Press jog shuttle (End).
Display information on next event: Rotate jog shuttle to ¥ and press.
Show other events: Rotate jog shuttle to ¥ and press.
Exit display: Rotate jog shuttle to ≈ and press; then rotate Jog shuttle three
times to
End and press. If the jog shuttle is not used for three minutes, the LCD
display shuts off automatically.
How to display the device version:
Press jog shuttle twice. (Between the first and second presses, the
LCD display
shows the OTT netDL firmware version.)
The OTT netDL unit activates the
LCD dis-
play
and shows the selection menu (if password protection for the LCD display
is active ➝ enter the four-digit password first; refer to online help).
Rotate jog shuttle to Information and press.
Rotate jog shuttle to System and press.
Rotate jog shuttle to Systeminfo and press.
The LCD display shows information on the system:
Line 1: Type and position of the expansion card/display/mainboard/modem
Line 2: Hardware revision
Line 3: Software revision.
Display other system information: Rotate jog shuttle to ¥ and press.
Exit display: Rotate jog shuttle to ≈ and press; then rotate Jog shuttle three
times to
End and press. If the jog shuttle is not used for three minutes, the LCD
display shuts off automatically.
39
To Next Page
Loading...
Need help?
General
