9.9 Starting the voice announcer (on site)
When an external analog voice-enabled modem is connected to the OTT netDL
unit and the voice announcer feature is enabled, measured values may be
announced by voice on site.
For more information on the voice announcer functionality, please refer to
Chapter 20.
How to start the voice announcer:
Press jog shuttle twice. (Between the first and second press, the
LCD display
shows the OTT netDL firmware version.)
The OTT netDL unit activates the
LCD
display and shows the selection menu
(if password protection for the LCD dis-
play is enabled ➝ enter the four-digt password first; refer to oline help.
Rotate jog shuttle to Information and press.
Rotate jog shuttle to System and press.
Rotate jog shuttle to Voice announcer and press ➝ the OTT netDL launches
the on-site voice announcer. The voice announcements may be heard through
the built-in speaker of the analog modem conncected.
Finish voice announcer: Rotate jog shuttle three times to the End position and
press. If the jog shuttle is not used for three minutes, the LCD display shuts off
automatically.
Note
The "Voice announcer menu item will be available only when announcer
texts are programmed in the OTT netDL unit.
40
To Next Page
Loading...
Need help?
General
