How to launch the "OTT SDI-12 Interface" software:
Establish the PC/OTT netDL communication link (refer to Chapter 8.2).
In the "Tools" menu, select the "SDI Interface" feature ➝ the operating program
starts the separate "OTT SDI-12 Interface" software. Through the OTT netDL
unit, the software establishes a communication link to the SDI-12 sensor. Then
the software provides a selection of SDI-12 commands that match the sensor
type connected.
Select the required SDI-12 command.
For more information on the "OTT SDI-12 Interface", please refer to the separate
online help.
49
To Next Page
Loading...
Need help?
General
