6
You can easily navigate from the basic view to the desired menu using the favourite view function. You can
navigate from one favourite view to another by tapping the button. There can be a maximum of five of
these views. The pre-installed favourite views show the circuits’ main menus. You can also save a particular
regulator view as your own favourite view. You can return from favourite views to the basic view by tapping
the ESC key until the basic view appears.
Navigate to the view you want to add to your favourite views. Hold down the button for an extended
period of time until the ”Save view in memory location:” menu opens. You can
`
t set service display as your
favourite display. You can
`
t set any favourite display as long as the service code
is active. Deactivate the service code by pressing Esc -button as long as the controller returns to main menu
and the display light will dim. You can save the favourite display after that.
Main menu
H2 Circuit menu
H1 Circuit menu
DHW Circuit menu
Setting a favourite view
Your own favourite view
DHW Info
Domestic hot water setting value 58.0 °C
Supply water 54.7 °C
Circulation water 53.6 °C
Actuator control 60 %
Trendiloki 28.01 08:26:19 [ 34.7 ] ( 13212 h )
38
28
1.3 Favourite views
Main menu
Inputs and outputs
H1 Control circuit
H2 Control circuit
DHW Control circuit
>
>
>
>
H1 info
H2 info
According to curve 31..0 °C
Calculated supply water setting 31.0 °C
-------- H1 MEASUREMENTS -----------------
Supply water 30.1 °C
According to curve 34.0 °C
Calculated supply water setting 34.0 °C
-------H2 MEASUREMENTS-----------------
Supply water 34.2 °C
To Next Page
Loading...
Need help?
General
