OUMAN H23 User Manual

20
7 SYSTEM SETTINGS
System settings include date and time, language, SMS and net-
work settings, display settings and device type information.
If you want to connect the H23 unit to an Ethernet network, you
will need an Oulink Ethernet adapter (additional equipment).
7.1 Setting date, time and language
It is important that date and time are correct. The date and time are
used e. g. in time programs (weekly schedule and holiday calendar) as
well as alarm indication and routing.
The H23 clock takes daylight savings and leap years into account au-
tomatically. The clock has a backup for power outages lasting at least
three days.
Hours and minutes can be set separately.
1. Set hours and press OK to accept.
2. Set minutes and press OK to accept.
1. Set day and press OK to accept (name of weekday is updated auto-
matically).
2. Set month and press OK to accept.
3. Set month and press OK to accept.
The language of the user interface can be change here.
The controller will automatically be switched to to daylight saving time
and to standard time, if the selection “In use” is made.
System settings → Time
System settings → Date
System settings → Language
System settings → Daylight saving time
Main menu
DHW Control circuit
Trend logs
Alarms
System settings
>
>
>
>
Time
Date
19:44
hhmm
Enter the hours
Enter the day
Mon 27.03.2017
Language
Daylight saving time
Suomi
English
Svenska
Eesti keel
Русский
In use
Not in use
System settings
Time 17:01 >
Date 27.03.2017 >
Daylight saving time In use >
Language English >
SMS settings >
Modbus RTU slave >
Display settings >
Type info >
Lock code Not in use >
Conguration >
Alarms Enabled>
Communication port GSM >
Time
Date
Daylight saving time
Language

OUMAN H23 Specifications

General

Brand	OUMAN
Model	H23
Category	Controller
Language	English