OUMAN H23 - 6 ALARMS

18
6 ALARMS
Every active alarm is shown in a separate row, where you can see when
the alarm has become active. Press OK to get more information about
the alarm.
In the alarm menu of H23 device, you can check the active alarms
and what alarms have been active. The number of
active alarms will be shown in the right corner of the main view.
The disabling of alarms can be activated. If the alarms are disa-
bled, the next symbol is shown in the main display.
The disabling is taken out of use in System settings → Alarms: Disabled/
Enabled.
Alarms > Active alarms
Key word:
Send message: Active alarms
The regulator sends a message showing all ac-
tive alarms. Message is informational.
H23 can send an alarm for a number of dierent reasons. Informa-
tion about the alarm is shown on the display. The alarm also
sounds a beeping noise.
If the regulator has a number of unacknowledged alarms and you
acknowledge the last one, the one before it will appear on the mo-
nitor.
When all active alarms have been acknowledged, the alarm win-
dow closes and the alarm sound stops.
You can also use ESC button. The alarm sound then stops and the
alarm windows close when you press the Esc button once.
Sensor fault M2
Sensor fault M4
PR 1 GROUP1
H1 Supply water temp. =10.2 °C
Received: 08.04.2017 02:27
Acknowledging alarms: press OK and
the alarm sound will mute. If the
reason for the alarm is still present,
the exclamation mark in the top right
will continue to blink.
Alarms
Alarms
Active alarms
Acknowledge all alarms
Alarm history
Reset alarm history
Alarms receivers
General alarms
Enable >
>
>
Active alarms
07.01.2017 12:24:52 H2 Sensor fault M4 07.01.2015
12:15:13 H1 Deviation alarm
>
>
2
2
• An exclamation mark in front of the date shows that the alarm has
not been acknowledged.
• The heading of the alarm view shows the reason for the alarm.
ACTIVE ALARMS
You can acknowledge all alarms by pressing OK.
Alarms > Acknowledge all alarms
PR 1 GROUP 1
Room temperature=-50.0 °C
Received: 07.01.2016 12:24:52
• What location the alarm is coming from
• Time the alarm was received.
Active alarms
Acknowledge all alarms