Owon XSA800 Series - Page 62

5.Menu Interpretation
57
5.19.3 [PowerOn/Preset►]
Used to set the analyzer power on parameters or reset
parameters.
5.19.3.1 [Power Set►]
Power-on parameter settings include [Factory],[User]and [Last].
5.19.3.2 [Preset►]
Power-on parameter settings include [Factory],[User]and [Last].
Note: To save the current system configuration as a user-defined
configuration, press the [Save/Recall] panel key and select the
[User Status] menu item.
Table 8-2 [Factory] Settings
Parameter
Value
Frequency
Center Frequency
500M
250.009000MHz
1G
500.009000MHz
1.5G
750.009000MHz
Start Frequency
9.000 kHz
Stop Frequency
500M
500.009000MHz
1G
1.000009000GHz
1.5G
1.500009000GHz
Frequency Step
500M
Auto
50.000000 MHz
1G
Auto
100.000000 MHz
1.5G
Auto
150.000000 MHz
Frequency Offset
0 Hz
Frequency Reference
Internal
SPAN
Sweep
500M
500.000000MHz
1G
1.000000000GHz
1.5G
1.500000000GHz
AMPTD
Reference Level
0.00 dBm
Attenuator
Auto 10 dB