5.17 【Meas】Measurement
Provide a variety of advanced measurement functions, pop-up
spectrum analyzer built-in and user-defined measurement function
soft menu, turn on or off the time spectrum, adjacent channel
power measurement, channel power measurement, occupied
bandwidth, Pass-Fail measurement menu.
5.17.1 [Measure off]
You can directly close the currently running measurement function,
you can also choose to close the measurement menu.
5.17.2 [Time Spec On Off]
Turn on time spectrum measure mode.
5.17.3 [ACPR On Off]
Turn on or off the adjacent channel power measurement. Press
【Meas Setup】 to pop up the parameters of the adjacent channel
power measurement soft menu. The adjacent channel power is
used to measure the ratio of the adjacent channel power of the
transmitter. The absolute value of the main channel power and the
absolute value of the adjacent channel power are obtained by the
linear power integration method, so that the adjacent channel
power ratio is gained.
5.17.4 [Chanel Power On Off]
Turn on or off channel power measurements. Press 【Meas Setup】
to pop up the channel power measurement parameter settings soft
menu. The channel power is used to measure the transmitter
channel power, according to the user set the channel bandwidth,
through the linear power integration method to obtain the absolute
value of the main channel power.
To Next Page
Loading...
Need help?
General
