CAUTION
Input voltage at RF input port must not be higher than 50 V
DC to avoid damage to the attenuator and input mixer
tracking generator.
3. RF Input 50Ω
The RF input may be connected to a device via a N type connector
CAUTION
When input attenuator is higher than 10 dB, the RF port
input signal must be less than +30 dBm.
Figure 4-6 Rear Panel
Table 4-4 Rear Panel Description
Stow the handle for mobile use.
You can lock the spectrum analyzer to a
fixed location using the security lock
(please buy it yourself) to secure the
spectrum analyzer.
HDMI output, connect an external monitor
or projector.