Owon XSA800 Series - Specification

6.Specification
64
6. Specification
This chapter lists the technical specifications and general technical
specifications of the spectrum analyzer. Unless otherwise stated,
the technical specifications apply to the following conditions:
⚫The instrument has been preheated for 30 minutes before use.
⚫
The instrument is in the calibration cycle and has been
self-calibrated.
"Typical" and "nominal" for this product are defined as follows
⚫Typical: Refers to the performance of the product under certain
conditions.
⚫Nominal: Refers to the approximate value under product
application process.
Frequency
Frequency Range
XSA805（TG）
9.000 kHz to 500.009 MHz
XSA810（TG）
9.000 kHz to 1.000009 GHz
XSA815（TG）
9.000 kHz to 1.500009 GHz
Frequency Resolution
1 Hz
Frequency Span
Span Range
0 Hz, 100 Hz to max frequency of instrument
Span Uncertainty
± span / (sweep points-1)
Internal Reference Frequency
Reference Frequency
10.000000 MHz
Reference Frequency
Accuracy
±[ (days since last calibrate × freq aging rate)
+ temperature stability + initial accuracy ]
Temperature stability
0℃ to 50℃, reference to 25℃
< 0.5 ppm
Aging rate
<1 ppm/year
Frequency Readout Accuracy
Marker frequency
resolution
span / (number of sweep points - 1)