Owon XSA800 Series - Page 71

6.Specification
66
Amplitude
measurement
range
DANL to +10 dBm, 100 kHz to 10MHz, Preamp
Off
DANL to +20 dBm, 10 MHz to 1.5 GHz, Preamp
Off
Reference Level
-80 dBm to +30 dBm, 0.1dBm by step
Preamp
20 dB, nominal, 100 kHz to 1.5 GHz
Input Attenuator
Range
XSA805（TG）
XSA810（TG）
XSA815（TG）
0 to 40 dB, in 1 dB step
Max Input DC
Voltage
50 V
Max continuous
power
+20dBm, average continuous power
Max. damage level
+30 dBm（1 W）
Display Average Noise Level
(attenuation = 0 dB, RBW = VBW = 100 Hz, sample detector, trace
average ≥ 50, 20℃ to 30℃, input impendence = 50 Ω)
Preamp
Off
9 kHz 至 1 MHz
-95 dBm (Typical), <-88
dBm
1 MHz 至 500 MHz
-140 dBm (Typical),
<-130dBm
XSA810（TG）
500 MHz to 1 GHz
XSA815（TG）
500 MHz to 1.5 GHz
-138 dBm (Typical),
<-128dBm
Preamp
On
9 kHz 至 1 MHz
-135 dBm (Typical),
<-128 dBm
1 MHz 至 500 MHz
-160 dBm (Typical),
<-150 dBm
XSA810（TG）
500 MHz to 1 GHz
XSA815（TG）
500 MHz to 1.5 GHz
-158 dBm (Typical),
<-148 dBm
Level Display
Logarithmic level axis
1 dB to 255 dB
Linear level axis
0 to reference level
Number of display
points
513
Number of traces
5
Trace detectors
positive-peak, negative-peak, normal,
sample, RMS, voltage average