PacBio Onso - System Checks

Page 47
© 2024 PacBio. All rights reserved. For research use only. Not for use in diagnostic procedures.
PN 103-140-400 REV05 JUN2024
9. System checks
For troubleshooting purposes, a PacBio Technical Support representative may request that the user perform
system checks to collect instrument health data. System checks should only be performed with guidance from a
PacBio Technical Support representative. Navigate to the hamburger menu and select System checks to open the
System checks menu to select the desired system check tests. Once system checks complete, test results can be
found in D:\PacBio\Metrics\PreRun to be shared with PacBio Technical Support.

Step
Instructions
9.1
On the main menu Home screen, select the hamburger menu at the top right and select “System checks”.
Waste weight check and/or thermistor check tests
9.2
Select “Open workspaces”. Load an empty waste bottle and empty instrument wash pack into the system.