SECTION 1 GENERAL
3
1.2 SAFETY NOTICES (continued)
To protect equipment from damage, a Caution will be used as follows:
USING IMPROPER GAUGE OF INPUT CABLE MAY OVERHEAT AND DAMAGE THE
EQUIPMENT.
SEE SECTION 2.0, SPECIFICATIONS, FOR THE PROPER RATING OF INPUT CABLE.
ALWAYS MAKE SURE THAT THE OUTPUT ON/OFF SWITCH
IS IN THE OFF POSITION BEFORE CHANGING
THE OUTPUT COUPLING MODE.
LOADS MAY BE DAMAGED DUE TO EXCESSIVE OUTPUT VOLTAGE
Read Section 3, INSTALLATION
Section 4, OPERATION
Section 7, SERVICE
of this manual before installing or operating this equipment.
To Next Page
Loading...