Need help?Do you have a question about the Pacific Power Source UPC-3 and is the answer not in the manual?
Details the warranty terms, coverage, and limitations for the unit.
Important warnings and cautions for safe operation and handling.
Detailed description of the UPC's features and capabilities.
Details output control capabilities like frequency and voltage.
Specifies frequency ranges, steps, and accuracy.
Details voltage control modes, ranges, and accuracy.
Details the Continuous Self Calibration function.
Specifies current limit settings and accuracy.
Details available waveforms and their editing capabilities.
Describes single, split, and three-phase output forms.
Specifies phase angle control range and accuracy.
Details voltmeter ranges, resolution, and accuracy.
Details ammeter ranges, resolution, and accuracy.
Specifies kVA metering accuracy.
Specifies kilowatt metering accuracy.
Specifies power factor meter accuracy.
Details frequency display ranges and accuracy.
Details harmonic analysis capabilities.
Details metering input connections.
Steps for installing the UPC into a System Control Unit.
Procedure to disconnect input power service.
Steps for physically installing the UPC unit.
Procedure for reconnecting cables and replacing the cover.
Steps to reconnect input power and turn the unit on.
Setting Transformer Ratio and Amps to Volts Ratio.
Set UPC transformer ratio to match the power source.
Set UPC ammeter scale to match the power source.
Set Baud Rate, Parity, and EOS Terminator for RS-232.
Set the GPIB device address for remote communication.
Instructions for quick setup and basic operation.
Explanation of how to select between Manual, Program, and Setup modes.
Steps for basic operation using Manual Mode.
Description of front panel controls and their functions.
Description of UPC specific controls and indicators.
Describes the V/I, Power, and Amps meter displays.
Details the Harmonic Analysis display.
How to enter and adjust voltage values.
Query commands to retrieve configuration and measurement data.
Procedure for external calibration of voltage and metering.
Details the warranty terms, coverage, and limitations for the unit.
Important warnings and cautions for safe operation and handling.
Detailed description of the UPC's features and capabilities.
Details output control capabilities like frequency and voltage.
Specifies frequency ranges, steps, and accuracy.
Details voltage control modes, ranges, and accuracy.
Details the Continuous Self Calibration function.
Specifies current limit settings and accuracy.
Details available waveforms and their editing capabilities.
Describes single, split, and three-phase output forms.
Specifies phase angle control range and accuracy.
Details voltmeter ranges, resolution, and accuracy.
Details ammeter ranges, resolution, and accuracy.
Specifies kVA metering accuracy.
Specifies kilowatt metering accuracy.
Specifies power factor meter accuracy.
Details frequency display ranges and accuracy.
Details harmonic analysis capabilities.
Details metering input connections.
Steps for installing the UPC into a System Control Unit.
Procedure to disconnect input power service.
Steps for physically installing the UPC unit.
Procedure for reconnecting cables and replacing the cover.
Steps to reconnect input power and turn the unit on.
Setting Transformer Ratio and Amps to Volts Ratio.
Set UPC transformer ratio to match the power source.
Set UPC ammeter scale to match the power source.
Set Baud Rate, Parity, and EOS Terminator for RS-232.
Set the GPIB device address for remote communication.
Instructions for quick setup and basic operation.
Explanation of how to select between Manual, Program, and Setup modes.
Steps for basic operation using Manual Mode.
Description of front panel controls and their functions.
Description of UPC specific controls and indicators.
Describes the V/I, Power, and Amps meter displays.
Details the Harmonic Analysis display.
How to enter and adjust voltage values.
Query commands to retrieve configuration and measurement data.
Procedure for external calibration of voltage and metering.
General| Brand | Pacific Power Source |
|---|---|
| Model | UPC-3 |
| Category | Controller |
| Language | English |
To Next Page