3
Setting Up
2
Charging the Battery
You must charge your Treo fully before using it. It may not turn on at all when you
first remove it from the box.
1. Plug the AC charger into a wall outlet.
2. Connect the charger cable to the bottom of the Treo with the word UP facing
the same way as your Treo screen.
3. Wait for the LED to turn solid green. This may take up to 3 hours.
Important Note:
It is vital that you use only Sprint-approved AC adapter chargers. Use of
unauthorized accessories could damage your phone and invalidate your warranty.
LED
Start Here.book Page 3 Monday, September 8, 2003 11:13 AM
To Next Page
Loading...
