153
Help
1. Unscrew the stylus tip to access the reset tool.
2. While holding Up , use the reset tool to gently press the reset button on the
back of your Treo.
3. When the Palm Powered logo appears, release Up .
4. Perform a soft reset. Some features, such as Wireless Mode, are not available
until you complete this step.
Hard Reset
A hard reset erases all data and third-party software on your Treo. Never perform a
hard reset without first trying a soft and system reset. You can restore previously
synchronized data with the next HotSync operation.
A hard reset can tell you whether a problem stems from your Treo or an
application installed on it. If you do not experience the problem after you perform
a hard reset, the problem may be related to software you installed. See page 162
for suggestions on diagnosing third-party software issues.
1. Unscrew the stylus tip to access the reset tool.
2. While holding the Wireless Mode button , use the reset tool to gently press
the reset button on the back of your Treo.
3. When the Palm Powered logo appears, release the Wireless Mode button .
4. When the warning appears, press Up to confirm the hard reset.
Start Here.book Page 153 Monday, September 8, 2003 11:13 AM
To Next Page
Loading...
