Chapter 18 Setting Preferences for Your Handheld
374
4. Enter the inactive period, and then select Minute(s) or Hour(s) from the pick list.
5. Press Function + Enter
,
or tap OK.
NOTE
You need to turn off and then turn on your handheld before this change is
enabled.
IMPORTANT
If you lock your handheld, you must enter the exact password to
reactivate your handheld. If you forget the password, your handheld will present the
hint you have entered to help you remember the password. If you still cannot
remember the password, you must perform a hard reset to resume using your
handheld. Performing a hard reset deletes all the records in your handheld; however,
you can restore all synchronized data at the next HotSync operation. See “Performing
a hard reset” in Appendix A for more information.
Locking your handheld manually
You can turn off and lock your handheld manually.
To lock and turn off your handheld:
1. Tap Lock & Turn Off.
2. To use your handheld, turn it on and then enter the password.
Recovering from a forgotten password
IMPORTANT
Deleting a forgotten password also deletes all entries and files marked
as Private.
Tap Lock and
Turn Off
To Next Page
Loading...
Need help?
General
