S-DBS Operating Instructions
Section 700
VI .o
issue 1 July 1990
Pooled Trunk Access * <Programming Required>
To access a pooled trunk group line with a one-touch key
1.
Pick up receiver
OR
Press ON/OFF key
2. Get outside dial tone by dialing access code 9 or 81. 82 or 83.
3. Dial the telephone number. The dialed number wiU appear on the
display.
NOTE: To operate this phone system as a Hybrid System, modifications must be
made by a qutied dealer for proper re-configuration and registration
procedures.
Flash Key * <Programming Required>
To make another call without either replacing the receiver or pressing the ON/OFF
key to get new dial tone.
1. Get
dial tone by briefly pressing the FLASH key. To disconnect from
PBX lines press the FLASH key for more than one second.
To Next Page
Loading...
