Panasonic 616 - On-Hook (Automatic) Transfer * <Programming Required; To Transfer a Screened Call; To Transfer an Unscreened Call; Transferring Calls

Section 700
S-DBS Operating Instructions
~ss~e-f&&+~~~~.- --... .-- -_ _...._ _--_e---------._..-. .~
Vl .o
TRANSFERRING CALLS
On-Hook (Automatic) Transfer * <Programming Required>
To transfer a screened call
1. Press HOLD to put the outside call on hold.
The line LED will flash
green and you will hear a continuous dial tone.
2.
Dial the extension number and call by voice.
3.
If not answered, press 1 to change to tone.
4. Once the call is answered and the extension user is informed of the
transfer. hang up. The line LED for the call on hold lights red.
To transfer an unscreened call
You can transfer calls directly to another extension without screening them.
1. Press HOLD key. The line LED will flash green and you will hear a
continuous dial tone.
2. Dial the extension number.
3.
Hang up. The line LED of the held call blinks red.
NOTE: You cannot transfer a call to an extension set for DND. The transferred call
will revert back to you if it is not answered within a specific time.
_____.-. .-- ------ --