Panasonic 616 - Assigning Two SSD Codes to a Single One-Touch Key

Section 700
S-DBS Operating Instructions
issue 1 July 1990
Vl .o
Assigning Two SSD Codes to a Single One-Touch Key
If you assign a frequently used access code to one SSD code and a telephone number
to a second SSD code, you can dial the telephone number by entering the first SSD
code followed by the second SSD code. However, both SSD codes can be programmed
on a One-Touch key.
1. Press ON/OFF key
2.
Press PROG key
3.
Press the One-Touch key
- ---.._
4: -- --
Press AUTO key -- -
5.
Key in the first SSD code for the access code.
6. Press REDIAL key to insert a pause between the access code and the
telephone number if necessary. Repeat for a longer pause.
8.
Key in the second SSD code for the telephone number.
9.
Press HOLD key
10. Press ON/OFF key
_.- ~- - .--- ..-- .- .