Panasonic AG-CX350

– 106 –
Chapter 4 Operation — Menu settings
The items that can be selected are as follows.
f [YES], [NO]
[SERVICE MODE]
Switches the camera to the service mode.
You can also check software information (licenses) on a computer and other equipment. Conrm “LICENSE.TXT” for the external drive recognized by a
computer.
The LCD monitor turns off after approximately ve to ten seconds when using the battery.
The screen will return to the service mode screen when the <%> button, <(> button, <)> button, or <=/&> button is pressed, or the multidial is
turned up or down.
The service mode is ended and the screen will display the camera image screen when the <SET> button is pressed or the multidial is pressed.
The items that can be selected are as follows.
f [YES], [NO]
[INFORMATION]
Displays the information of the camera.
[VERSION]
Displays the information of the camera.
[MODEL] Displays the product name of the camera.
[SERIAL NO.] Displays the serial number of the camera.
[NETWORK ID(MAC ADDRESS)] Displays the MAC address for the <LAN> terminal of the camera.
[VERSION] Displays the rmware version of the camera.
[OPERATION TIME]
[TOTAL OPERATION] Displays the total operation time.
[UPDATE]
Updates the rmware.
Insert the memory card where the update le is saved into card slot 1.
The items that can be selected are as follows.
f [YES], [NO]
[LANGUAGE]
Sets the display language.
This is not displayed when the [OPTION] menu → [AREA SETTINGS] → [AREA 2] is set.
f When [AREA SETTINGS] is set to [AREA 1]
[ ]
Japanese
[English] English
(Factory setting: [ ])
f When [AREA SETTINGS] is set to [AREA 3]/[AREA 4]
[English] English
[Español] Spanish
[Français] French
(Factory setting: [English])
[MENU INITIALIZE]
Returns the setting value of the menu to the factory setting. The camera is restarted after executing.
The items that can be selected are as follows.
f [YES], [NO]
[OPTION] menu
A special menu is prepared considering additional functions in the future.
This is displayed by pressing the <MENU> button while holding down the <EXIT> button.
The [OPTION] menu is not displayed on AJ-UPX360ED.
[AREA SETTINGS]
Select the region in to be used before using the camera.
[AREA 1] Selects Japan.
[AREA 2] Selects Taiwan and South Korea.
[AREA 3] Selects United States of America, Canada, and Central and South America regions.
[AREA 4] Selects Asia region (excluding Japan, Taiwan, and South Korea), Oceana region, and India.