– 28 –
Chapter 2 Description of Parts — Basic operation
Basic operation
Multidial operation
Operate the multidial on the camera by turning it in vertical direction or pushing it.
f Turning the multidial in vertical direction will move the cursor.
The cursor can also be moved by pressing the <%> button, <(> button, <)> button, and <=/&> button.
f Pressing the multidial will select or conrm the item with cursor.
Selection and conrmation are also available by pressing the <SET> button.
f Values of the menu or the pages of the thumbnail screen can be changed continuously by pressing and turning the multidial vertically to x the setting.
Values of the menu or the pages of the thumbnail screen can be changed continuously even by pressing and holding the <%> button, <(> button,
<)> button, and <=/&> button.
@@
NOTE
t For details about operating the menu, refer to “When operating with the multidial” (page 65).
Touch operation of the LCD monitor
The LCD monitor can be operated by directly touching with a nger.
Do not touch the LCD monitor with a pointed hard object such as a ball point pen.
r Touching
An operation to press and release the LCD monitor. An item or icon can be selected, or an item can be executed.
f To select an icon, touch the center of the icon.
f It will not operate while touching a different location of the LCD monitor.
r Sliding
An operation to move a nger while touching the LCD monitor. Playback operation such as the skip playback or direct playback, etc. can be performed.
r Touching and holding
An operation to keep on pressing, then releasing the LCD monitor. Values of the menu or the pages of the thumbnail screen can be changed
continuously.
@@
NOTE
t For details about operating the menu, refer to “When operating by touching the LCD monitor” (page 66).
To Next Page
Loading...
