– 34 –
Chapter 3 Preparation — Mounting accessories
Mounting accessories
Adjusting the grip belt
f Adjust the grip belt so that it ts the size of your hand.
f The grip belt is already mounted to the camera.
f If the buckle is difcult to tighten, move the pad forward and tighten the buckle again.
1
2
Pad
Buckle
1
Open the buckle section.
2
Pull the end of the belt.
Attaching the shoulder strap
Mount the supplied shoulder strap to the shoulder strap mounting section.
20 mm or more
20 mm or more
@@
NOTE
t Make sure that the shoulder strap is securely attached.
Mounting the lens hood
Removing
Lens hood release button
1
While pressing the lens hood release button, turn the lens hood in the direction of the arrow to remove it.
To Next Page
Loading...
