– 58 –
Chapter 3 Preparation — Tally lamp
Tally lamp
The front tally lamp and the rear tally lamp can be illuminated during the shooting.
1
Select the [OTHERS] menu → [LED] → [TALLY LED] → [FRONT]/[REAR]/[BOTH].
f The tally lamp will ash when the camera is in the following status.
‑ When the remaining recording capacity of the memory card or the remaining battery level is low (one time per second)
‑ When the memory card has no more space to record (four times per second)
‑ When a warning such as a system error or a recording abnormality has occurred (four times per second)
@@
NOTE
t The tally lamp will not illuminate or ash when the [OTHERS] menu → [LED] → [TALLY LED] → [OFF] is set.
To Next Page
Loading...
