Panasonic AG-CX350

– 72 –
Chapter 4 Operation — Menu settings
[USER2] Sets the function to assign to the <USER 2> button.
(Factory setting: [ZEBRA])
[USER3] Sets the function to assign to the <USER 3> button.
(Factory setting: [WFM])
[USER4] Sets the function to assign to the <USER 4> button.
(Factory setting: [A.IRIS LEVEL])
[USER5] Sets the function to assign to the <USER 5> button.
(Factory setting: [SLOT SEL])
[USER6] Sets the function to assign to the <USER 6> button.
(Factory setting: [IRIS])
[USER7] Sets the function to assign to the <USER 7> button.
(Factory setting: [AWB])
[USER8] Sets the function to assign to the [USER8] button icon.
(Factory setting: [IR REC])
[USER9] Sets the function to assign to the [USER9] button icon.
(Factory setting: [FOCUS MACRO])
[USER10] Sets the function to assign to the [USER10] button icon.
(Factory setting: [AREA])
[USER11] Sets the function to assign to the [USER11] button icon.
(Factory setting: [ATW LOCK])
[USER12] Sets the function to assign to the [USER12] button icon.
(Factory setting: [MENU])
[SCENE FILE] menu
Sets the detailed image quality adjustment of the camera video.
This menu cannot be set when the thumbnail screen is displayed.
For the factory settings, refer to “Factory setting value of the scene le” (page 107).
[FILE SELECT]
Selects the scene le (1 to 6).
The items that can be set are as follows.
f [F1:], [F2:FLUO.], [F3:SPARK], [F4:B.STR], [F5:CINE], [F6:HLG]
[NAME EDIT]
Edits the name of the scene le selected in the scene le menu. (Maximum eight characters)
[LOAD/SAVE/INITIALIZE]
Loads/saves/initializes the setting values of the scene le assigned to the current scene le number (any one from 1 to 6).
[LOAD] Selects and loads the scene le saved in the internal memory of the camera.
[SAVE] Saves the current setting value as a scene le in the internal memory of the camera by specifying the title and the le
number.
[INITIALIZE] Initializes the selected scene les (1 to 6) to the factory settings.
[VFR]
Sets permission/prohibition of the variable frame rate (VFR).
The items that can be set are as follows.
f [ON], [OFF]
[FRAME RATE]
Switches the shooting interval and exposure time when [VFR] is [ON].
The items that can be set are as follows.
f When the [SYSTEM] menu → [FREQUENCY] → [59.94Hz] is set
- [60fps], [54fps], [48fps], [44fps], [40fps], [36fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps], [24fps], [22fps], [21fps], [20fps], [18fps],
[15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
f When the [SYSTEM] menu → [FREQUENCY] → [50.00Hz] is set
- [50fps], [48fps], [45fps], [42fps], [37fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps], [24fps], [23fps], [22fps], [21fps], [20fps], [18fps],
[15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
[SYNC SCAN TYPE]
Switches the synchro scan display settings.
[sec] Displays in time.
[deg] Displays in the shutter aperture angle.
[SYNC SCAN]
Displays the speed of the synchro scan shutter that is used when shooting video for television etc.