– 172 –
Chapter 7 Output and Screen Display — Screen status display
No Item
Camera image
screen
When the <DISP/
MODE CHK> button
is pressed
STATUS Playback screen
24 High-sensitivity mode
l
—
l
—
25 Iris
l
—
l
—
26 Zoom
l
—
l
—
27 System resolution/system frequency
l
—
l
—
28 Recording format
l
—
l
—
29 Clip name
l
—
l l*
3
30 Recommended ND lter
l l l
—
31 Message display area
l l l l
32 Level gauge
l l l
—
33 Error display of auto white balance — —
l
—
34 Error display of auto black balance — —
l
—
35 Remote control status in an IP connection — —
l
—
36 Multi manual function
l
—*
4
l
—
37 Color temperature
l
—
l
—
38 Optical image stabilizer function
l
—
l
—
39 Scene le name
l
—
l
—
40 Area mode function/auto focus area width
adjustment function
l
—
l
—
41 Waveform monitor
l l
— —
42 IR recording
l
—
l
—
43 Digital zoom
l
—
l
—
44 Focus
l
—
l
—
45 Audio monitor volume adjustment
l l l l
*1 This is not displayed in the status where
/ is not displayed.
*2 Displays when the remaining recording capacity of the memory card or remaining battery level gets low.
*3 The display position differs in the playback screen. Refer to Screen display during playback (page 170).
*4 Displays when the multidial, <=/&> button, <(> button, or <SET> button is pressed. The display is cleared approximately three seconds after the operation.
Mode check display
The camera settings and status can be displayed on the viewnder or LCD monitor screen for check.
Press the <DISP/MODE CHK> button for one second or more while displaying the camera image screen to display the STATUS screen of the mode
check.
The display toggles in the order of the STATUS screen, FUNCTION screen, AUDIO screen, SWITCH screen, NETWORK screen and the camera image
screen each time the <DISP/MODE CHK> button is pressed.
Each screen of the mode check is displayed for approximately ve seconds.
The screen does not switch while the <DISP/MODE CHK> button is pressed.
Press the <EXIT> button while each screen is displayed to return to the camera image screen.