Panasonic AG-CX350

– 119 –
Chapter 4 Operation — Handling setting data
2
Enter the text to set with the keyboard.
3
Select [Enter].
A conrmation screen is displayed.
4
Select [SET].
The le is saved.
f An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages” (page 200).
Saving the setup le by overwriting a le on the memory card
Overwrites the le selected in the list of the setup les saved on the memory card with the current setting values of the camera.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE].
The list of setup les saved on the memory card in card slot 1 is displayed.
2
Select the file to overwrite from the list of setup files.
The le name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A conrmation screen is displayed.
4
Select [SET].
The le is saved.
Saving the setup le to the camera memory
Saves the current setting value of the camera into the camera memory.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [SAVE].
Loading the setup le
Loading setup les from the memory card
Loads the setup le saved on the memory card in card slot 1.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [LOAD].
The list of setup les stored in the specied folder of the memory card in card slot 1 is displayed.
2
Select the file name for the file to load.
3
Select [SET].
Loading of the le is started. The camera is restarted after loading.
f An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages” (page 200).
f The le saved by a camera with different rmware version may not be able to load.
Loading setup les from the camera memory
Loads the setup le saved on the camera memory.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [LOAD].
Loading of the le is started. The camera is restarted after loading.