Panasonic AG-CX350

– 77 –
Chapter 4 Operation — Menu settings
[R-G]
Adjusts the linear matrix. (Red - Green)
The items that can be set are as follows.
f [−63]…[63]
[R-B]
Adjusts the linear matrix. (Red - Blue)
The items that can be set are as follows.
f [−63]…[63]
[G-R]
Adjusts the linear matrix. (Green - Red)
The items that can be set are as follows.
f [−63]…[63]
[G-B]
Adjusts the linear matrix. (Green - Blue)
The items that can be set are as follows.
f [−63]…[63]
[B-R]
Adjusts the linear matrix. (Blue - Red)
The items that can be set are as follows.
f [−63]…[63]
[B-G]
Adjusts the linear matrix. (Blue - Green)
The items that can be set are as follows.
f [−63]…[63]
[COLOR CORRECTION]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[R] ([SAT])
Corrects red color saturation.
The items that can be set are as follows.
f [−63]…[63]
[R] ([PHASE])
Corrects the red hue.
The items that can be set are as follows.
f [−63]…[63]
[R-R-Mg] ([SAT])
Corrects the color saturation between red and “colors between red and magenta”.
The items that can be set are as follows.
f [−63]…[63]
[R-R-Mg] ([PHASE])
Corrects the hue between red and “colors between red and magenta”.
The items that can be set are as follows.
f [−63]…[63]
[R-Mg] ([SAT])
Corrects the color saturation between red and magenta.
The items that can be set are as follows.
f [−63]…[63]
[R-Mg] ([PHASE])
Corrects the hue between red and magenta.
The items that can be set are as follows.
f [−63]…[63]
[Mg] ([SAT])
Corrects magenta color saturation.
The items that can be set are as follows.
f [−63]…[63]
[Mg] ([PHASE])
Corrects the magenta hue.