- 59 -
(Notes on the peaking of Focus Assist)
≥ When EVF/LCD detail is enabled, Focus Assist is canceled. (l 53)
(Notes on the magnified display of Focus Assist)
≥ Some information on the screen disappears when the screen is magnified.
≥ In the following cases, the screen is not magnified during Focus Assist:
j During motion picture recording or PRE-REC (l 91, 164)
j When using Digital Zoom
j When using Area Mode (l 87)
j During auto recording (l 95)
j In Variable Frame Rate Mode (l 91)
j During AG ROP application connection (l 130)
≥ If you set the magnification level of the magnified display to 5.5k or higher, peaking may not be
displayed when using i.Zoom (l 49).
AG-UX90EJ_DVQP1150ZA.book 59 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
