Panasonic AJ-PX800G - Page 123

– 123 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[B Gain] Displays the Bch output when the <WHITE BAL> switch is at the <A> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the Bch axis by changing the output of Bch.
[−400]…[400]
f Factory setting: [0]
[G AXIS] Displays the G axis output when the <WHITE BAL> switch is at the <A> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the G axis by changing the output of Rch/Bch.
[−400]…[400]
f Factory setting: [0]
[COLOR TEMP Bch
SETTING]
[COLOR TEMP] Displays the color temperature when the <WHITE BAL> switch is at the <B> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color temperature
can be changed by changing the output balance of Rch and Bch.
[2000K]…[15000K]
f Factory setting: [3200K]
[R Gain] Displays the Rch output when the <WHITE BAL> switch is at the <B> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the Rch axis by changing the output of Rch.
[−400]…[400]
f Factory setting: [0]
[B Gain] Displays the Bch output when the <WHITE BAL> switch is at the <B> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the Bch axis by changing the output of Bch.
[−400]…[400]
f Factory setting: [0]
[G AXIS] Displays the G axis output when the <WHITE BAL> switch is at the <B> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the G axis by changing the output of Rch/Bch.
[−400]…[400]
f Factory setting: [0]
[CHROMA LEVEL] Sets the chroma level of P
R
and P
B
signals.
[−99%]…[40%], [OFF]
f Factory setting: [0%]
[CHROMA PHASE] Finely adjusts the chroma phase of the P
R
signal and P
B
signal.
[−31]…[31]
f Factory setting: [0]
[MATRIX] Selects the matrix table to display the color for shooting.
[NORM1]: Displays the color suitable for shooting outdoors of under a halogen lamp.
[NORM2]: Displays more vivid color than [NORM1].
[FLUO.]: Displays the color suitable for shooting indoors under uorescent light.
[CINELIKE]: Displays the color suitable for shooting cinematic video.
f Factory setting: [NORM1]
[MATRIX SETTING] [MATRIX R-G] Adjusts the linear matrix. (Red - Green)
[−63]…[63]
f Factory setting: [0]
[MATRIX R-B] Adjusts the linear matrix. (Red - Blue)
[−63]…[63]
f Factory setting: [0]
[MATRIX G-R] Adjusts the linear matrix. (Green - Red)
[−63]…[63]
f Factory setting: [0]
[MATRIX G-B] Adjusts the linear matrix. (Green - Blue)
[−63]…[63]
f Factory setting: [0]
[MATRIX B-R] Adjusts the linear matrix. (Blue - Red)
[−63]…[63]
f Factory setting: [0]
[MATRIX B-G] Adjusts the linear matrix. (Blue - Green)
[−63]…[63]
f Factory setting: [0]
[COLOR CORRECTION
SETTING]
[R (SAT)] Corrects red color saturation.
[−63]…[63]
f Factory setting: [0]
[R (PHASE)] Corrects the red hue.
[−63]…[63]
f Factory setting: [0]
[R-R-Mg (SAT)] Corrects the color saturation between red and “colors between red and magenta”.
[−63]…[63]
f Factory setting: [0]
[R-R-Mg (PHASE)] Corrects the hue between red and “colors between red and magenta”.
[−63]…[63]
f Factory setting: [0]
[R-Mg (SAT)] Corrects the color saturation between red and magenta.
[−63]…[63]
f Factory setting: [0]