Panasonic AJ-PX800G - Page 124

– 124 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[R-Mg (PHASE)] Corrects the hue between red and magenta.
[−63]…[63]
f Factory setting: [0]
[Mg (SAT)] Corrects magenta color saturation.
[−63]…[63]
f Factory setting: [0]
[Mg (PHASE)] Corrects the magenta hue.
[−63]…[63]
f Factory setting: [0]
[Mg-B (SAT)] Corrects the color saturation between magenta and blue.
[−63]…[63]
f Factory setting: [0]
[Mg-B (PHASE)] Corrects the hue between magenta and blue.
[−63]…[63]
f Factory setting: [0]
[B (SAT)] Corrects blue color saturation.
[−63]…[63]
f Factory setting: [0]
[B (PHASE)] Corrects the blue hue.
[−63]…[63]
f Factory setting: [0]
[B-Cy (SAT)] Corrects the color saturation between blue and cyan.
[−63]…[63]
f Factory setting: [0]
[B-Cy (PHASE)] Corrects the hue between blue and cyan.
[−63]…[63]
f Factory setting: [0]
[Cy (SAT)] Corrects cyan color saturation.
[−63]…[63]
f Factory setting: [0]
[Cy (PHASE)] Corrects the cyan hue.
[−63]…[63]
f Factory setting: [0]
[Cy-G (SAT)] Corrects the color saturation between cyan and green.
[−63]…[63]
f Factory setting: [0]
[Cy-G (PHASE)] Corrects the hue between cyan and green.
[−63]…[63]
f Factory setting: [0]
[G (SAT)] Corrects green color saturation.
[−63]…[63]
f Factory setting: [0]
[G (PHASE)] Corrects the green hue.
[−63]…[63]
f Factory setting: [0]
[G-Yl (SAT)] Corrects the color saturation between green and yellow.
[−63]…[63]
f Factory setting: [0]
[G-Yl (PHASE)] Corrects the hue between green and yellow.
[−63]…[63]
f Factory setting: [0]
[Yl (SAT)] Corrects yellow color saturation.
[−63]…[63]
f Factory setting: [0]
[Yl (PHASE)] Corrects the yellow hue.
[−63]…[63]
f Factory setting: [0]
[Yl-Yl-R (SAT)] Corrects the color saturation between yellow and “colors between yellow and red”.
[−63]…[63]
f Factory setting: [0]
[Yl-Yl-R (PHASE)] Corrects the hue between yellow and “colors between yellow and red”.
[−63]…[63]
f Factory setting: [0]
[Yl-R (SAT)] Corrects the color saturation between yellow and red.
[−63]…[63]
f Factory setting: [0]
[Yl-R (PHASE)] Corrects the hue between yellow and red.
[−63]…[63]
f Factory setting: [0]
[Yl-R-R (SAT)] Corrects the color saturation between “colors between yellow and red” and red.
[−63]…[63]
f Factory setting: [0]