97
5. System settings
9 Turn [F4] to set the control (panning, tilting, lens focusing and lens zooming) speed using the Speed Item.
Fast: Control is e
xercised at the fastest speed.
Middle:
Control is exercised at the medium speed.
(This cannot be selected for the control of lens focusing or lens zooming.)
Slow: Control is e
xercised at the slowest speed.
:
When controlling the pan-tilt head’s power to On, turn [F5] to select On, and press the [F5] switch.
When controlling it to Off, turn [F5] to select Off, and press the [F5] switch.
After turning the pan-tilt head’s power to On, make sure to use this operation to turn the selection On.
This setting can be selected when “P/TDirt” has been selected as the protocol setting.
See
5-6-3.
The menu display (On or Off) does not indicate the status of the camera.
To Next Page
Loading...
