Panasonic CS-Z25VKEW Installation Instruction

84
14.5 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)
 Purpose
o To provide quiet cooling operation compare to normal operation.
 Control condition
o Quiet operation start condition
 When “POWERFUL/QUIET” button at remote control is pressed twice.
QUIET will be shown on remote control display.
o Quiet operation stop condition
 When one of the following conditions is satisfied, quiet operation stops:
 POWERFUL/QUIET button is pressed again.
 Stop by OFF/ON switch.
 Timer “off” activates.
 Mild Dry Cooling button is pressed.
 FAN SPEED button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
 During quiet operation, if timer “on” activates, quiet operation maintains.
 After off, when on back, quiet operation is not memorised.
 Control contents
o Fan speed is changed to Lo-.
14.6 Quiet Operation (Heating)
 Purpose
o To provide quiet heating operation compare to normal operation.
 Control condition
o Quiet operation start condition
 When “POWERFUL/QUIET” button at remote control is pressed twice.
QUIET will be shown on remote control display.
o Quiet operation stop condition
 When one of the following conditions is satisfied, quiet operation stops:
 POWERFUL/QUIET button is pressed again.
 Stop by OFF/ON switch.
 Timer “off” activates.
 Mild Dry Cooling button is pressed.
 FAN SPEED button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except
fan mode only.
 During quiet operation, if timer “on” activates, quiet operation maintains.
 After off, when on back, quiet operation is not memorised.
 Control contents
o Fan speed manual
 Fan speed is changed to Lo-.
o Fan Speed Auto
 Fan speed is changed to Lo-.
14.7 Powerful Mode Operation
 When the powerful mode is selected, the internal setting temperature will shift lower up to 2.0°C (for Cooling/Soft
Dry) or higher up to 3.5°C (for Heating) than remote control setting temperature for 20 minutes to achieve the
setting temperature quickly.

Panasonic CS-Z25VKEW Specifications

General

AC input voltage	230 V
Design load (cooling)	2.5 kW
Annual energy consumption (cooling)	103 kWh
Hourly energy consumption (cooling)	- kWh
Design load (heating) (Warmer heating season)	- kW
Design load (heating) (Average heating season)	2.7 kW
Energy efficiency class (heating) (Colder heating season)	-
Energy efficiency class (heating) (Average heating season)	A+++
Annual energy consumption (heating) (Average heating season)	741 kWh
Type	Air conditioner indoor unit
Multi-split	No
Product color	White
Dehumidifying capacity	1.5 l/h
Air conditioner functions	Cooling, Dehumidifying, Heating
Cooling capacity in watts (max)	3200 W
Cooling capacity in watts (min)	850 W
Heating capacity in watts (max)	5000 W
Heating capacity in watts (min)	800 W
Cooling capacity in watts (nominal)	2500 W
Cooling energy efficiency (EER, W/W)	4.81
Heating energy efficiency (COP, W/W)	4.79
Seasonal efficiency rating (cooling) (SEER)	8.5
Seasonal efficiency rating (heating) (SCOP)	5.1
Heating capacity in watts (nominal) (Warmer heating season)	- W
Heating capacity in watts (nominal) (Average heating season)	3400 W
Indoor unit type	Wall-mountable
Indoor unit depth	194 mm
Indoor unit width	919 mm
Indoor unit height	295 mm
Indoor unit weight	10000 g
Indoor units quantity	1
Cooling airflow (indoor unit)	612 m³/h
Heating airflow (indoor unit)	672 m³/h
Indoor unit sound power level	55 dB
Indoor unit noise level (low speed)	19 dB
Indoor unit noise level (high speed)	39 dB
Wi-Fi	Yes
Outdoor unit noise level	- dB