22 VQT2N02
Using the [SETUP] menu (Continued)
[LANGUAGE]
Change display
language.
Set the language displayed on the screen.
[DEMO MODE]
View demonstration of
functions.
[STABILIZER DEMO.]: (Only during recording)
Indicates the extent of jitter detected by the camera
(Estimate)
Extent of jitter
Extent of jitter after stabilization
Large ← Small → Large
• When the demo screen is displayed, press [MENU/SET]
to switch the Optical Image Stabilizer between on and
off.
• Cannot be displayed in playback mode.
• To stop→ Press [DISPLAY] button.
• Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory Slide Show
[OFF]/[ON]
• To close → Press [MENU/SET]
• If the camera is left switched on while connected to the
AC adaptor (optional) and with no card inserted, the
demo will automatically begin whenever no operations
are performed for approx. 2 minutes.
• [AUTO DEMO] cannot be displayed on external devices
such as TVs.
Item Settings, notes
For details about the setting procedure in the [SETUP] menu. (→14)
To Next Page
Loading...
