VQT2N02 57
For details about the setting procedure in the [REC] menu. (→14)
[BURST]
Enables a rapid succession of still pictures to be taken. Succession of still pictures taken
while shutter button is held down.
■
Mode:
■
Settings:[OFF]/
Speed
∗
No. of pictures
DMC-FP2 Approx. 1.5 pictures/sec
Until card/built-in memory is full
DMC-FP1 Approx. 1.8 pictures/sec
∗
Recording becomes progressively slower. (The onset of delay varies depending on the type of
card and the recording pixel level.)
●
Focus is fixed from first picture. Exposure and white balance is adjusted for each
picture.
●
When using self-timer: Fixed at 3 pictures.
●
Burst speed may be reduced if ISO Sensitivity is set to high, or if shutter speed is
reduced in darker locations.
●
When burst is selected, the flash is disabled.
●
When burst is performed with the built-in memory, data writing takes some time.
●
Settings will be stored even if power is turned off.
●
When you record subjects in motion where there is a significant difference between
light and dark areas, it may not be possible to achieve the optimal exposure.
●
Auto review performed regardless of [AUTO REVIEW] setting.
●
Burst is not available in the Scene Modes [TRANSFORM], [HI-SPEED BURST],
[FLASH BURST], [STARRY SKY], [FILM GRAIN], and [PHOTO FRAME].
●
Using the [HI-SPEED BURST] scene mode allows a faster succession of still pictures to
be taken. [FLASH BURST] is convenient to take continuous pictures using flash in dark
places.
[DIGITAL ZOOM]
Multiplies effect of optical zoom or Extra optical zoom by up to 4 times. (For details (→30))
■
Mode:
■
Settings: [OFF]/[ON]
●
This is fixed at [ON] when [MACRO ZOOM] is set.
●
Not available in Motion Picture Recording Mode. The setting in other recording mode is
applied.
To Next Page
Loading...
