Panasonic DMC-FP2 - Taking Pictures with Your Own Settings; [NORMAL PICTURE] Mode

VQT2N02 27
Taking pictures with your own settings
[NORMAL PICTURE] Mode
Recording mode:
■
To use zoom
(→29)
■
To use flash
(→35)
■
To adjust picture brightness
(→39)
■
To take close-up pictures
(→37)
■
To adjust colouring
(→55)
●
If a warning is displayed about jitter, use
[STABILIZER], a tripod, or [SELFTIMER].
●
If aperture value or shutter speed is displayed in red,
correct exposure has not been achieved. Use flash or
change [SENSITIVITY] settings.
Aperture value Shutter speed
Jitter alert
display
Using the [REC] menu to change settings and set up your own recording environment.
Shutter button
Open the lens cover
The power is turned on.
Display the screen for recording
mode selection
Select [NORMAL PICTURE] Mode
Take a picture
Press halfway
(press lightly to
focus)
Press fully
(press the button all
the way to record)
Focus display
(when focus is aligned:
flashing → illuminated)
AF area
(aligns focus with subject;
when complete: red → green)