EasyManua.ls Logo

Panasonic DMC-FP2 - High Sens

Panasonic DMC-FP2
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VQT2N02 45
How to select a scene. (40)
Using flash in Scene Modes. (36)
[HIGH
SENS.]
Prevents blurring of subject in dark, indoor
conditions.
Select the aspect ratio and the picture size with
▲▼ and press [MENU/SET].
Tips
Focus: Max. W: 10 cm (0.33 feet) and above
Max. T : 50 cm (1.64 feet) and above
Pictures may appear slightly
grainy due to high sensitivity.
Main fixed setting:
[SENSITIVITY]: ISO1600 - 6400
The following functions cannot
be used:
Extra optical zoom/[DIGITAL
ZOOM]
[HI-SPEED
BURST]
Takes pictures of rapid movement or a
decisive moment.
Select the aspect ratio and the picture size
with ▲▼and press [MENU/SET].
Take pictures. (Hold shutter button)
Still pictures are taken continuously while the
shutter button is pressed fully.
Maximum
speed
Approx. 4.6 pictures/sec
(DMC-FP2)
Approx. 5.5 pictures/sec
(DMC-FP1)
Number of
recordable
pictures
Built-in
memory
Approx. 15 or
more
Card
Approx. 15 to 100
(The maximum is 100)
The burst speed and number of recordable
pictures change according to the recording
conditions or types of cards.
Tips
Focus: Max. W: 10 cm (0.33 feet) and above
Max. T : 50 cm (1.64 feet) and above
The number of burst recording
pictures increases immediately
after formatting.
The picture quality becomes
slightly lower.
Main fixed settings:
[FLASH]: [FORCED FLASH
OFF]
[SENSITIVITY]: ISO500 - 800
The focus, zoom, exposure, white
balance, shutter speed and ISO
sensitivity are fixed to the settings
for the first picture.
The following functions cannot
be used:
Extra optical zoom/[DIGITAL
ZOOM]/[SELFTIMER]/[BURST]
If recording is repeated,
depending on the usage
conditions, there may be a delay
before the camera takes pictures
again.
Scene Uses, Tips Notes

Table of Contents

Related product manuals